|
 |
|
|
|
|
|
| |
Harman/Kardon AVR146 A/V Receiver With HDMI Switching ( Refurbished ) HaHarman/Kardon presents an affordable module for your home theater: a linear 5.1 channel amplifier with 30 watts of clean (THD is less than 0.07%; TIM distortion is unmeasurable) sound per channel. Of course, an amplifier is just an amplifier; this unit allows you to remotely select video sources, reduces the number of cables you have to hook up to your TV set, and has a built-in AM/FM tuner as well.
You've already got some nice equipment, but you wish you had some way to consolidate it, and you don't feel like throwing away perfectly good equipment to do so. Cut down on the tangle of cabling going to your TV set, donate some of those switch boxes and jumper cables to some deserving charity, and let your equipment work together as a home theatre should: in harmony. Product Specifications | Model | | Brand | harman/kardon | | Model | AVR146 | | Features | | Features | Audio
Input Sensitivity/Impedance, Linear (High-Level): 200mV/47k ohms
Signal-to-Noise Ratio (IHF-A): 100dB
Dolby Pro Logic I and II Adjacent Channel Separation: 40dB
Dolby Digital Adjacent Channel Separation: 55dB
DTS Adjacent Channel Separation: 55dB
Frequency Response at 1W (+0dB, –3dB): 10Hz – 130kHz
High Instantaneous Current Capability (HCC): +/-25 Amps
Transient Intermodulation Distortion (TIM): Unmeasurable
Slew Rate: 40V/µsec
Video
Television Format: NTSC
Input Level/Impedance: 1Vp-p/75 ohms
Output Level/Impedance: 1Vp-p/75 ohms
Composite and S-Video Video Frequency Response: 10Hz – 8MHz (–3dB)
Component Video Video Frequency Response: 10Hz – 100MHz (–3dB)
HDMI: Switching | | Spec | | Channels | 5.1 | | Power Rating | Stereo Mode Continuous Average Power (FTC) per Channel: 40 Watts per channel, 20Hz – 20kHz, @ <0.07% THD, both channels driven into 8 ohm
Five-Channel Surround Modes, Power per Individual Channel, All Channels Operating at Full Power
Front L & R Channels: 30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Center Channel: 30 Watts @ <0.07% THD, 20Hz – 20kHz into 8 ohms
Surround Channels: 30 Watts per channel @ <0.07% THD, 20Hz – 20kHz into 8 ohms | | FM/AM Tuner | FM Tuner
Frequency Range: 87.5 – 108.0MHz
Usable Sensitivity: IHF 1.3µV/13.2dBf
Signal-to-Noise Ratio: Mono/Stereo 70/68dB
Distortion: Mono/Stereo 0.2/0.3%
Stereo Separation: 40dB @ 1kHz
Selectivity: ±400kHz, 70dB
Image Rejection: 80dB
IF Rejection: 90dB
AM Tuner
Frequency Range: 520 – 1720kHz
Signal-to-Noise Ratio: 45dB
Usable Sensitivity: Loop 500µV
Distortion: 1kHz, 50% Mod 0.8%
Selectivity: ±10kHz, 30dB | | Input | A/V Inputs: 4
S-Video Inputs: 4
Component Video Input: 2
Analog Audio Inputs: 4
Digital Audio Inputs (Coax/Optical): Rear panel 2/2, Front panel 1/1
Direct Audio Inputs: 5.1
HDMI Inputs: 2 | | Output | A/V Outputs: 2
S-Video Outputs: 2
Component Video Output: 1
Digital Audio Outputs (Coax): Rear panel 1
HDMI Output: 1 | | Power Supply | Power Requirement: AC 120V/60Hz
Power Consumption: 65W idle, 540W maximum (5 channels driven) | | Dimensions | 17.31" x 6.5" x 15" | | Weight | 21.12 lbs. | ; |
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
| |
|
|
|
|
| |
 More
Images |
|
|
|
|
|
|
|
|
| | |
|
|
|
|
|
|
| |
|
|
| |
| $69.95 $15.95 |
|
 |
|
|
|
|
| |
|
|
| |
| $169.95 $59.95 |
|
|
|
|
|
|
| |
|
|
| |
| $199.95 $79.95 |
|
|
|
|
|
|
| |
|
|
| |
| $229.95 $99.95 |
|
|
|
|
|
|
|
|
|
